Benefits of the Pre-insulated Panel
Reduced heat/energy loss.
Optimization of energy resources.
High efficiency.
General Features
Manufactured with high-quality materials under strict production standards, this pre-insulated pipes and fittings system is designed to deliver excellent performance in applications such as chilled/cold water systems, hot water systems, district cooling/heating, industrial glycol cooling, refrigeration, VRF/VRV, among others.
Thanks to its innovative high-pressure injected rigid expanded PUR/PIR foam thermal insulation and mechanical protection, the ThermoZmart Pre Insulated Pipes and Fittings System effectively reduces heat/energy losses and optimizes energy resources, making it an ideal solution for the refrigeration industry and other fields.
Two-component high-quality insulation: polymeric isocyanate foam and cast ECO 360-40. This insulation leads the market due to its 99% closed cell structure, providing minimal thermal conductivity and high resistance to moisture absorption. Additionally, our insulation system is 100% ECO-FRIENDLY, as it is free from CFCs and HCFCs, and it uses the ECOMATE expansion agent, which does not harm the ozone layer. This product is also VOC-free, making it a 100% Eco-Friendly Expansion Agent classified by SEMARNAT, complying with the Montreal and Kyoto Protocols.
| General Features | Units | Limits | Methods |
|---|---|---|---|
| Packed Density | Kg / m3 | 45 – 50 | NMX-C126-82 |
| Closed Cell Content | % | >94 | ASTM D 2856 |
| Initial Thermal Conductivity | W / °C m | 0.0220 | NMX-C181-1984 |
| Dimensional Stability 1 week at -20 °C | %Vol | <0.6% | UNI 809 |
| Compression Strength | psi | 42 | UNI 6350 |
| Water Vapor Permeability | ng / Pa s m | 0.1 | NMX-C-210-1984 |
Pipe Diameter and External Diameter Table (after injecting PUR thermal insulation)
| Central Pipe (in.) | Outer Jacket (in.) |
| 1/2″ | 3″ |
| 3/4″ | 3″ |
| 1″ | 3″ |
| 1 1/4″ | 4″ |
| 1 1/2″ | 4″ |
| 2″ | 6″ |
| 2 1/2″ | 6″ |
| 3″ | 6″ |
| 4″ | 8″ |
| 6″ | 10″ |
| 8″ | 12″ |
| 10″ | 14″ |
| 12″ | 16″ |
| 14″ | 18″ |
| 16″ | 20″ |
| 18″ | 24″ |
| 20″ | 24″ |
| 24″ | 30″ |
- Chilled/cold water systems
- Hot water systems
- District cooling/heating
- Industrial cooling by glycol
- Refrigeration VRF/VRV
- And other similar applications that require a high-quality pre-insulated pipe solution.
Each solution is designed to optimize energy resources and reduce heat/energy losses, resulting in significant cost savings and increased efficiency in the production process.
Component of the Pipe
The pre-insulated steel/iron pipes and fittings consist of three main parts:
- High-quality central pipe:Ensuring safe and effective liquid/fluid conveyance.
- High-pressure injected rigid polyurethane foam insulation:Our PUR insulation effectively reduces heat/energy losses and optimizes energy resources, making it an ideal solution for the refrigeration industry and other fields.
- High-quality outer protection: We offer different options for the outer protection of our pre-insulated pipe, including PVC, anti-corrosive polyethylene tape, and corrugated polyethylene pipe (PAD). This ensures the mechanical protection and durability of our product.
Opciones de protección mecánica
Manufactured with high-quality materials under strict production standards, this pre-insulated pipes and fittings system is designed to deliver excellent performance in applications such as chilled/cold water systems, hot water systems, district cooling/heating, industrial glycol cooling, refrigeration, VRF/VRV, among others.
Thanks to its innovative high-pressure injected rigid expanded PUR/PIR foam thermal insulation and mechanical protection, the ThermoZmart Pre Insulated Pipes and Fittings System effectively reduces heat/energy losses and optimizes energy resources, making it an ideal solution for the refrigeration industry and other fields.
Hydraulic PVC:
Interior of the building, without UV protection.
Smooth PEAD:
Exterior of the building, with UV protection.
Corrugated PE:
Exterior of the building, with UV protection, for buried/underground installations.
ThermoZmart Pre Insulated Pipe Benefits
- AHORRO DE ENEGÍA reduciendo las perdidas de calor.
- AHORRO en mantenimiento, evitando que el aislante este en contacto ante situaciones propias de la instalación.
- Reducción en el riesgo de condensación por ruptura de barreras de vapor inestables.
- Evita la acumulación externa de hongos y baterías.
- Mechanical protection and vapor barrier.
- Densidad óptima en el aislamiento de poliuretano.
- Soluciones a la medida, nos adaptamos a los requerimientos de su sistema y/o proyecto.
- La camisa externa tiene un elemento contra rayos UV (Polietileno).
- Lower structural weight..
- Alta resistencia al impacto de elementos externos a su instalación.
Preguntas frecuentes
ThermoZmart is the brand of the Pre Insulated Pipes and Fittings System configured, designed, and manufactured by Teksol Group Solutions.
As part of its supply strategy, Teksol has different sites from which the pre-insulated pipe and fittings system is supplied. Therefore, knowing the location of your project, the best origin location for system supply to the destination port will be designed.
- Chilled/cold water
- Hot water
- Water with glycol
- Ammonia
- Refrigerant gas, variable volume
- District cooling and heating
Pre-insulated pipes with corrugated mechanical protection, as the grooves of the corrugated mechanical protection of Polyethylene allow it to adapt to the irregularities of the terrain, without the need for a concrete bed. It is recommended to analyze the central pipe to be used depending on the application.
- Installation time, as three products are installed in one solution. -
- Reduction of labor.
- Reduction of condensation risks due to oversight when installing traditional systems or unintentional ruptures of the vapor barrier; condensation can generate both heat losses and structural damage to the building.
- It is recommended to use a mechanical protection made of Polyethylene.
The insulating power of a material is measured through the evaluation of its thermal conductivity, or "K" Factor. This value indicates the amount of heat that a sample of a certain material allows to pass during a certain time, with a temperature differential between one side and the other.
- PVC C40/80, PPR, Steel, PB-1, PEX
- CPVC, PPR, PE, Copper
- PEAD
- Steel
- Copper, Pex Al Pex
These are the main ones, however, if you have any specific requirements, please write to: sales.intl@teksolgroupsolutions.com; and a technical advisor will guide you.
- PVC C40/80
- CPVC C80
- PPR (Polypropylene)
- Steel
- ThermoZmart is the brand of rigid pre-insulated pipes manufactured by Teksol, however, for more than 15 years we have handled different solutions in pre-insulated pipes, including flexible ones. Therefore, please send us an email and we will gladly assist you: intl@teksolgroupsolutions.com
- No, ThermoZmart is the name given to the pre-insulated pipe and fittings system solution. Teksol does not manufacture central pipes, these are acquired from different manufacturers worldwide, with the highest quality standards.
- This depends on the type of central pipe, but as an example, we supply PVC/CPVC pipes in lengths of 5.8/6 meters.
The vapor barrier is an element that prevents the generation of interstitial dampness or condensation. It is a very effective and inexpensive method, and, in addition, the materials used in the construction may themselves perform this function.
Some examples:
- Elements integrated into thermal insulation, such as:
- Rubbers, surface layer
- Polyolefins, integrated throughout their mass
- XLPE, aluminum foil
- Granular glass, blanket
- Fiberglass, aluminum foil
- Pre-insulated pipes, PVC/PE
- It is an element that prevents the passage of humid air through the cells of a material, seeking to avoid condensation problems and excessive energy consumption.
- Examples:
- Hydraulic PVC,
- PEAD
- Aluminum foil
- Stainless steel
